Made by the FurniMesh team. FurniMesh (furnimesh.com) is our own product, so we benefit when you use it. Details.

About Free Image to STL

Last updated November 22, 2026

Free Image to STL is a browser-based converter and a small set of printing guides, made by the team behind FurniMesh (furnimesh.com), an AI 3D modeling platform for furniture. FurniMesh is operated by UAB FURNISYSTEMS in Lithuania. This page explains why the site exists, how we write it and how we handle the fact that we also sell a product.

Why this site exists

Turning a picture into a relief or a lithophane is a simple geometric job, and it should not need an account, an upload or a waiting queue. We built a converter that does the whole job inside your browser: it reads the image, builds a closed mesh and writes a binary STL in millimeters on your own device. The image never reaches us or anyone else.

We also see the same confusion again and again: people run a photo of a chair or a lamp through an image to STL tool and expect the object. A relief cannot give them that. The guides on this site explain where a relief is the right answer and where a full 3D model is, so you pick the right approach before you spend filament.

Who makes it

The site is written and maintained by the FurniMesh team. We work on 3D model generation and file conversion every day, which is why the converter and the guides focus on practical details: sample spacing against nozzle width, thickness ranges for lithophanes, units and scaling. We do not publish personal bylines; the team is credited as a whole.

Our relationship with FurniMesh

FurniMesh is our own product, and we benefit when you use it. We say so in the header and footer of every page, in line with the FTC's guidance on endorsements. We recommend FurniMesh only where it is a genuine fit: turning a photo of a real furniture piece or similar single object into a full 3D model, then into an STL through its converter. For flat reliefs and lithophanes, the free converter on this site or another relief tool is the right choice, and we say that too.

Links to furnimesh.com carry UTM tags so FurniMesh can see the visit came from this site. There are no other affiliate links and no advertising.

How we write and check the guides

Numbers in our guides fall into two groups. Geometry numbers, such as triangle counts, file sizes and sample spacing, follow directly from how the converter builds its mesh, and you can reproduce them in the tool. Printing numbers, such as layer heights and infill for lithophanes, are given as common starting points rather than guarantees, because printers and filaments differ. When we describe another company's tool, we check its own website first and state only what it publishes; our comparison method has the details.

Reporting an error

If a fact is out of date, a number does not add up or the converter produces a file that misbehaves, please tell us at contact@freeimagetostl.com. Include the page address and, for tool problems, your browser and the settings you used. We correct confirmed errors and update the page date when we do.